Service
While performing cleaning or maintenance on the
machine, the unit should be off and disconnected from
the power supply.
When the suction is reduced, due to the fi lters becoming
clogged, the red light will come on. Th e pre-fi lter should
be changed. If the light is still on the the HEPA fi lter
should be changed too.
With heavy dust loads the life of the fi lters are shorter.
Use only original spare part fi lter 4080. Use suitable
breathing protection and do the operation in a closed
room. Th e used fi lter should be sealed in a plastic bag and
disposed of according to approved methods.
Check regularly that the electrical cable is not damaged
in any way. With replacement of the cable and contact,
use only water proof replacements.
Th e DC AirCube 2000 should be performance tested
and checked at least once per year or more frequently if
subject to intensive use.
Change the fi lter:
2013-05-13
Because this machine is used with dangerous sub-stances
maintenance is vital, worn parts should be replaced.
Never compromise the function of the DC AirCube
2000, use only original spare parts.
Th e fan is maintenance free.
DC AirCube 2000 - 10
Part No 94146-B