Technical Data - geo-FENNEL EcoDist Pro Manual De Usuario

EN

Technical Data

Distance measurement
Typical Measuring Tolerance* ± 2.0 mm / 0.08 in ***
Maximum Measuring
Tolerance**
Range of target plate*
Typical Range
Range at unfavourable
condition ****
Smallest unit displayed
Ø laser point
at distances
General
Laser class
Laser type
Protection class
Autom. laser switch off
Autom. power switch-off
Battery durability (2 x AAA)
Dimension (H x D x W)
Weight (with batteries)
Temperature range:
- Storage
- Operation
8
± 3.0 mm / 0.12 in ***
50 m / 164 ft
40 m / 132 ft
35 m / 115 ft
1 mm / 1/16 in
* applies for 100 % target reflectivity (white painted
6 / 30 mm
wall), low background illumination, 25 ºC
(10 / 50 m)
** applies for 10 to 500 % target reflectivity, high back-
ground illumination, 0 ºC to + 40 ºC
2
*** Tolerances apply from 0.05 m to 10 m with a confi-
635 nm, < 1 mW
dence level of 95%. The maximum tolerance may
deteriorate to 0.15 mm/m between 10 m to 30 m and
IP40 (not water
protected)
to 0.2 mm/m for distances above 30 m
after 90 s **** applies for 100 % target reflectivity, background
illumination of approximately 30'000 lux
after 180 s
up to 3000 measure-
ments
116 x 45 x 29 mm
4.57 x 1.77 x 1.14 in
0.10 kg / 3.527 oz
-25 to 70 °C
-13 to 158 °F
0 to 40 °C
32 to 104 °F
geo-FENNEL EcoDist Pro ®
Functions
Distance measuring yes
Permanent measuring yes
Addition/Subtraction yes
Area yes
Volume yes
Pythagoras 2-point, 3-point