Status Lights; Audio Sources And Priorities - Terrano -X Manual De Usuario

STATUS LIGHTS

LED Indication
None
1 BLUE flash every 3 seconds
2 BLUE flashes every 3 seconds
1 RED flash every 3 seconds
Low-battery Beep every 3 minutes
2 RED flashes every 3 seconds
Low-battery Beep every 3 minutes
Solid RED

AUDIO SOURCES AND PRIORITIES

If two connected audio sources try to play audio simultaneously, the TERRANO-X automatically determines
which to play through the speakers based on the priority of the connected devices.
Higher Priority

1. Mobile phone audio or GPS instructions
2. Intercom/Click-to-Link (CTL)
3. A2DP (Stereo Bluetooth) audio
4. Multi-Port–(for corded connection i.e. music players)
Lower Priority
• Incoming mobile phone calls will interrupt ongoing intercom calls
• Incoming intercom calls will interrupt the A2DP audio source
• Click-to-Link® calls and Intercom calls have the same priority. A Click-to-Link request cannot interrupt
an Intercom call in progress, and vice-versa.
IC (Intercom) Busy Tone: If you are on a mobile call, Click-to-Link call, or receiving GPS instructions and
Cyclist A or Cyclist B try to connect to you for an IC Call, you will both hear a busy tone (double beep).
4 |
Status
TERRANO-X is OFF
Standby mode No active audio sources
Active mode–Call in progress / music or other audio source is ON
Standby mode–Battery is low
Active mode – Battery is low
Charging
*
*GPS instructions from Smartphone GPS Apps are prioritized like A2DP audio