Pioneer SE-C4BT Manual De Instrucciones página 18

6. Enjoying music
To use the wireless headphones to listen to music from a Bluetooth device, you
must first perform pairing with the Bluetooth device using the A2DP audio profile.
For details on how to perform pairing, see P.5.
(1) With power to the wireless headphones' turned off, hold the Power but-
ton depressed for about three seconds.
The headphones' power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to.
When pairing is completed, the wireless headphones will automatically connect
to the Bluetooth device.
* If automatic connection is not achieved, or the headphones automatically connect
to a different Bluetooth device than the one you wish to use, follow the instructions
for the desired Bluetooth device regarding manual connection.
Controls when listening to music
If the connected Bluetooth device supports AVRCP, the following operations can be
used.
• ( + ) button
Press once : Increase volume.
Press and hold : Advance to next track or chapter.
• ( – ) button
Press once : Decrease volume.
Press and hold : Return to beginning of track or chapter.
• Power button
Press once : Play/Pause.
* When sound volume is set to maximum or minimum levels a beep sound will be
produced from the headphones.
* S ound volume can be adjusted on the matching Bluetooth device.
* D epending on the specifications of the connected Bluetooth device, the controls
noted above and controls on the Bluetooth device may not be supported.
* Depending on the specifications of the connected Bluetooth device, the music
playback settings may need to be configured. Consult the user's manual for the
Bluetooth device.
* Depending on the specifications of the connected Bluetooth device, a music play-
back application may start automatically or the music cannot be paused/played.
Consult the user's manual for the Bluetooth device.
6
En