Intended Use; Important Safety Instructions - SMA Sunspec TS4-R-F Instrucciones Breves

2 Safety
2 Safety
2.1

Intended Use

The TS4-R-F Rapid Shutdown solution is a cost-effective way to meet the requirements of the
UL 1741, National Electrical Code
powerline-based Sunspec communication signal for Rapid Shutdown. The signal is easy to
implement due to its reliable functional ability. The communication between inverter and module
electronics is done via the DC conductors. The installation times and labor costs are reduced since
no additional communication product is required. The compliance with the open SunSpec standard
makes the TS4-R-F a flexible solution since it can be combined with various inverters.
Use this product only in accordance with the information provided in the enclosed documentation
and with the locally applicable laws, regulations, standards and directives. Any other application
may cause personal injury or property damage.
Alterations to the product, e.g. changes or modifications, are only permitted with the express written
permission of SMA Solar Technology AG. Unauthorized alterations will void guarantee and
warranty claims and in most cases terminate the operating license. SMA Solar Technology AG
shall not be held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not qualify as the
intended use.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient place for future reference and observe all instructions contained therein.
This document does not replace and is not intended to replace any local, state, provincial, federal
or national laws, regulations or codes applicable to the installation, electrical safety and use of the
product. SMA Solar Technology AG assumes no responsibility for the compliance or non-
compliance with such laws or codes in connection with the installation of the product.
All components must remain within their permitted operating ranges and their installation
requirements at all times.
2.2

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS
This section contains safety information that must be observed at all times when working on or with
the product.
The product has been designed and tested in accordance with international safety requirements. As
with all electrical or electronical devices, there are residual risks despite careful construction. To
prevent personal injury and property damage and to ensure long-term operation of the product,
read this section carefully and observe all safety information at all times.
4 TS4-F-SMA-IS-xx-10
®
2014 and 2017. The TS4-R-F is compatible with the
SMA Solar Technology AG
Quick Reference Guide