Cts65 Remote Control Commands; Status:DEvice - Rohde & Schwarz CTS65 Manual De Instrucciones

Operating Manual
3

CTS65 Remote Control Commands

Network (CTS65)
CONFigure:NETWork[:TYPE] <value>
Syntax:
Value range: GSM | G09 |
DCS1800 | G18 |
PCS1900 | G19 |
DECT
State: Option: none
Set: IDLE
Query: ALL
Testmode (CTS65)
PROCedure:SELect[:TEST] <value>
Syntax:
Value range: NONE
MIDL
MODidle
IQSPec
BANalysis
RFG
MANual
Value:
(NONE):
(MIDL):
(MODIDLE):
(IQSPEC):
(BANALYSIS):
(RFG):
(MANual):
Current instrument state (CTS65)
Syntax:

STATus:DEVice?

Return: IDLE
MIDL
MSYN
MCE
MOD
IQSP
BAN
RFG
DFP
DPP
DCE
State: ALL Option: none
1094.0006.65
With Query
| No test mode (initial state)
| MS-test
| Module test
| IQ-spectrum
| Burst Analysis
| Rf generator
| DECT-Test
Allowed State:
MIDL, MOD, DPP, DFP, DCE
NONE
IDLE, IQSP, BAN
MOD, RFG
MOD, RFG
IQSP, BAN
IDLE
| Idle (initial state)
| MS test: Idle
| MS test: Synched
| MS test: Call established
| Module test Idle
| IQ-spectrum
| Burst Analysis
| RF generator
| DECT: Fixed Part
| DECT: Portable Part
| DECT: Connection Established
Query only
Option: none With query
none
K7
K7
K7
K7
8
CTS 65
Default: DECT
Default: IDLE
Note: Setting of NONE followed by
a query will return IDLE.
Use the command
STATus:DEVice? to query
the state of the CTS.
Default: IDLE
E-6