USING THE GLASS TEA KETTLE
Hold the tea steeper lid in one
hand, and grip the tea steeper
holder in the other hand. With slight
downward pressure, rotate the tea
12
steeper lid off of the tea steeper.
Then, place the tea steeper lid back
inside the kettle lid, twisting to lock
into place.
NOTE: Use the handle to remove. The
steeper cylinder will be hot.
TIP: If the tea steeper lid is stuck on the
tea steeper, this issue may be caused by
twisting the tea steeper lid too tightly
onto the tea steeper. Use a slight pressure
to rotate the tea steeper lid when placing
on the tea steeper. Do not over-rotate.
FOR DETAILED INFORMATION ON USING THE GLASS TEA KETTLE
Visit
kitchenaid.com/quickstart
and tips on how to use your Glass Tea Kettle.
10 | USING THE GLASS TEA KETTLE
13
for additional instructions with videos, inspiring recipes,
The kettle automatically goes
into Warm mode after reaching
temperature and holds for 30
minutes at Warm (158°F/70°C). The
light around the ON/OFF button
will remain lit while the Glass Tea
Kettle is in Warm mode. If the kettle
is removed, to keep the kettle warm
after replacing it on the base, slide
the temperature selector over to
WARM and press the ON/OFF
button again.