D-Link MUSIC EVERYWHERE Guia De Instalacion página 11

TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
1. HOW DO I RESET MY MUSIC EVERYWHERE TO FACTORY DEFAULT SETTINGS?
- Ensure the product is powered on.
- Using a paperclip, press and hold the reset button on the bottom of the device for 5
seconds.
Note: Resetting the product to the factory default will erase the current configuration
settings. The default Wi-Fi network name (SSID) and password are printed on
Music Everywhere's Wi-Fi Configuration Card.
2. HOW DO I CONNECT A PC OR OTHER DEVICE TO MUSIC EVERYWHERE IF I HAVE
FORGOTTEN MY WI-FI NETWORK NAME (SSID) OR WI-FI PASSWORD?
- If you haven't changed the extended Wi-Fi network's settings, you can use the
network name (SSID) and Wi-Fi password on the Wi-Fi Configuration Card.
- If you did change the network name (SSID) or Wi-Fi password and you did not record
this information on the Wi-Fi Configuration Card or somewhere else, you must reset
the device as described in Question 1 above.
- It is recommended that you make a record of this information so that you can easily
connect additional wireless devices in the future. You can use the included Wi-Fi
Configuration Card to record this important information for future use.
TECHNICAL SUPPORT
DCH-M225
dlink.com/support
11