Volume Adjustment - CYBEX CP-21073 Manual Del Propietário

Volume Adjustment

To change volume, Press the VOL + and VOL - keys on the remote control or use the Volume Right and Left Arrow
buttons on the fi tness equipment console to increase or decrease Audio Volume Level. See Below.
NOTE: Exit any on-screen menus before adjusting volume.
If wireless headphones are being used, audio volume can be increased or decreased using a control on the headphone
earpiece. NOTE: To achieve the desired volume setting, it may be necessary to adjust the wireless headphone volume
and the volume on the fi tness equipment.
If the Closed Caption/Subtitle function is enabled, the Closed Captions/Subtitles will automatically switch on
when the Volume is adjusted to 0 (zero).
Connecting an i-Pod (Available only on models equipped with 30 pin cable)
The Fitness equipment features i-Pod Connectivity. Attached to the front of the Fitness Equipment Console is an i-Pod 30
Pin Connecting Cable. There is also a Non-Slip Accessory Tray where the i-Pod can be located during a workout.
There are three benefi ts from connecting the i-Pod:
1. Play Video from the i-Pod on the Cybex PEM Screen
2. Plays Music from the i-Pod through the Cybex PEM Screen
3. Charges the i-Pod battery through the 30 pin cable
How To Connect:
• Connect the i-Pod to the 30 Pin i-Pod Connector on the Fitness Equipment Console.
• Allow the i-Pod to authenticate.
• Select the input source (see below).
• Set the selected i-Pod content to play.
• Securely locate the i-Pod on the Non-Slip Accessory Tray incorporated on the Fitness Equipment.
Input Source Selection
The Fitness Equipment has a source selection/input button which can be used to switch from viewing TV to viewing video
from an i-Pod. Presently there are four sources/inputs on the CP-21073 – TV, iPod, VGA or DTV.
• When using the Fitness Equipment, press the input/source selection button (A/B).
• An input/source menu will appear on screen.
• Using the input/source selection button (A/B), highlight the desired
input. Wait for menu to close.
Alternatively, press the input button on the TV Remote Control to toggle
between TV, iPod, VGA or DTV Source.
• Press the input selection button.
• An input menu will appear on screen.
• Use the Up/Down arrow buttons to highlight the desired input.
• Press the enter button to choose selection or wait for menu to close.
3-4
Remote Control Keys
Volume
Fitness Equipment Buttons