Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
50131
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS
EN
MODEL 50131
GENERAL INFORMATION
Make sure to use the studs in your wall before mounting the wall plate. Do not mount this product into the
drywall.
- Distance min / max. the wall: 80-210mm
- Arm swivel angle, left and right: 180º
- Tilt angle: -15º / +15 °
PARTS INCLUDED
A.- Two plastic anchors
B.- Two heavy duty screws
C.- Four M4x20 mounting screws
D.- Four M5x20 mounting screws
E.- Four M6x25 mounting screws
F.- Four φ6 washers
G.- Four φ4 washers
H.- One spanner
WARNING
- Use caution when hanging heavy objects
- Hang only flat screen televisions on wall mount.
- Not for children
NOTE
Please note it is recommended that this product requires fixing by a professional to avoid accidental damage
or injury. The supplier will not be held liable for damage caused by inadequate fixing.
INSTALLATION
1. Use the wall plate as a template to drill 2 hole of dia 10mm diameter and 50mm depth in the wall. Then
wedge 2 plastic anchors into the holes. Use a drill to secure.
2. Put the wall plate on the wall, and then screw 2 heavy duty screws into the plastic anchors to fix the wall
plate on the wall.
3. Install the panel TV on the TV fixed plate with suitable screws (C/D/E) and washers selected from the parts
bag.
4. Use spanner loosen the nut to adjust the angle of the TV between -15º /+15º to a suitable position, and
then screw the knobs firmly.
-6-
Publicidad
