Manual Station Search - Disney MD40518 Manual Del Usuario

Reallocating programme numbers
You can change the allocation of programme numbers manually:
• Select CH ALLOCATION and confirm
with . The programme number of the
currently displayed station appears at
upper right ("20" in the illustration).
• With the
station for which you wish to change the
programme number.
• Confirm with . The programme number following "CH
ALLOCATION" appears marked in orange.
• With the
ber ("7" in the illustration) for the current station and confirm
with . In this example, the programme number is changed
from 20 to 7.

Manual station search

If you find, after automatic station search, that a station is missing, you can set this manually.
• Select MANUAL from the CH
TUNING menu and confirm with
The manual station search window
will appear.
• Using the
either PAL or SECAM-L.
• Confirm with . The white band indication is marked orange and F.TUNE + - (fine tune)
is displayed.
• Press or
or backwards. The progress indication moves until a station
is found and then stops. The programme number (CH) indi-
cation appears, marked in orange.
- If you wish to save this station, allocate the programme
number.
- If you are looking for another station, press
again..
• You can fine-tune the picture with the – F.T. + buttons on the remote control. The arrows
above the band indication blink each time a button is pressed.
buttons, select the
buttons, select the new programme num-
.
buttons, select
to start manual station search forwards
or
GB-13