Chicco GoodNight Stars Manual De Instrucciones página 5

Instruction Manual
GB USA
Age: 0m+
WARNINGS
Please read these instructions carefully and keep for future reference.
This toy runs on 3 alkaline 1.5 Volt AA batteries. Batteries are not included in the pack.
For your child's safety: Warning!
• Before using the product remove and dispose of any plastic bags and any other packaging (e.g. fasteners
and fixing ties etc) and keep them out of reach of children. Suffocation hazard.
• Check the product regularly for signs of wear and damage and to ensure that it is assembled correctly.
Should any part be damaged, do not use the toy and keep it out of reach of children.
• This toy must only be used under adult supervision.
HOW TO USE THE TOY
The product has 2 light mode functions (1)LAMP, (2)PROJECTOR and 1 musical mode function (3)MUSICAL
NOTE BUTTON.
How to switch the light projector ON and OFF.
There are 2 different user modes to choose from: (1) LIGHT, or (2) PROJECTOR.
Use the switch to select a light effect mode which will start automatically.
When LIGHT(1) mode is selected, it activates the coloured lights in the luminous globe, whilst PROJECTOR
MODE (2) starts the projection of coloured stars. Both light effects will continue for 10 minutes, after which
the product will switch to stand-by mode. To interrupt/start the light effects, press the moon button on the
front of the product.The light projection effect is best visible when the room is completely dark.
Turn the switch on the back of the device to OFF to turn the appliance OFF completely.
How to start the music using the music button:
Switch the product ON and select LIGHT mode (1) or PROJECTOR mode (2); now press the MUSICAL NOTE
BUTTON(3), to start the music compilation of 2 classical tunes (Bach, Rossini), 2 New Age tunes and 2
night-time nature sounds.
When operating in LIGHT mode (1), the music will play for around 12 minutes and then switch to stand-by
mode. When operating in PROJECTOR mode (2), the music will play for around 6 minutes before switching
to stand-by mode.
HOW TO FIT AND REMOVE THE REPLACEABLE BATTERIES
• Batteries must only be fitted by an adult.
• To replace batteries:
1. Use a screwdriver to remove the compartment cover screw.
2. Remove the battery compartment cover, remove the spent batteries and fit the new batteries making
sure they are fitted with their poles in the right direction (as indicated on the product).
3. Replace the cover and tighten the screw.
• Always keep batteries and tools out of the reach of children.
• Always remove spent batteries from the toy to avoid the danger of leakage from the battery damaging
the product.
• If the batteries happen to leak liquid, replace them immediately, making sure you clean the compartment
beforehand; wash your hands thoroughly if you come into contact with any such liquid.
• Always remove the batteries if the product will not be used for a long period of time
• Only use alkaline batteries of the same type or equivalent to the type recommended for the correct
function of this product.
5