EGO BH1001 Manual Del Operador página 12

7. Insert the plug into the adaptor
(Fig.10).
8. Insert the adaptor into the EGO tool's
battery receptacle.
9. Follow the instructions in the tool's
operator's manual to start the tool.
10. After finishing work, remove the
adaptor from the tool and then pull
the plug out of the adaptor. Hang the
plug on the hook (Fig. 11).
WARNING:
emergency or safety concern, immediately
release the chest buckle and remove the
backpack link.
12
56V LITHIUM-ION BACKPACK LINK — BH1001
In the event of any
10
Plug
11
Adaptor