Velleman DVR8L1 Guía Rápida página 4

4. Features
• MPEG-4 real-time compression format
• multiplex: allows live display, recording, playback and backup
• backup function: supports USB 2.0 flash drive and network backup
• intelligent motion trigger recording
advanced motion detection
o
scheduled motion detection recording (with 3 adjustable parameters)
o
• system auto recovery after power reconnected
• supports daylight-saving function
• supports manual / timer / motion / alarm recording functions
• multi-language OSD: English, French, Dutch, German, Portuguese, Spanish, Czech, Hungarian,
Greek, Chinese and Vietnamese
• user manual: English
• hard disks in option: 500GB (HD500GB/S) or 750GB (HD750GB/S) (not included)
• high resolution recording:
DVR8L1
frame: 720 x 480 pixels with 60 IPS / 720 x 576 pixels with 50 IPS
o
CIF: 352 x 240 pixels @ 240 IPS / 352 x 288 pixels @ 200 IPS
o
DVR16L1
frame: 720 x 480 pixels with 120 IPS / 720 x 576 pixels with 100 IPS
o
CIF: 352 x 240 pixels @ 480 IPS / 352 x 288 pixels @ 400 IPS
o
5. Overview
Refer to the illustrations on page 2 of this manual.
Front panel
HDD
ALARM
LED
indications TIMER
(left to right)
PLAY
POWER
MENU Press to enter the main menu.
ALARM
MANUAL
LIST
MOTION
SYSTEM
TIMER
SLOW In playback mode, press to play the recorded file slowly.
SEQ Press to activate the call monitor function, and press again to quit.
ENTER Press to confirm settings.
PLAY Press to play the recorded video.
ZOOM In live or playback mode, press to enlarge the image of the selected channel.
8CH: press to show the 4/9 channel display mode.
16CH: press to show the 4/9/16 channel display mode.
POWER Press and hold to switch off the DVR.
1 ~ 8 Press a button to select the corresponding channel.
1 ~ 16
NAVIGATE
22/07/2009
DVR8L1 - DVR16L1
reading or recording activities on the hard disk
an alarm was triggered
timed recording is enabled
the DVR is in playing mode
DVR power is on
List the information of the alarm-trigger-recorded files.
List the information of the manual-recorded files. A separate file is
created for each manual recording.
List the information of the motion-trigger-recorded files.
List the information of the system-recorded files. The DVR system will
save one recorded file every hour.
List the information of the timer-recorded files.
Press one of the four positions on the navigate button to move the
cursor up ( ), down (
In play-back mode, press the buttons to play/pause (
( ), fast rewind (
In setting mode, press the up (
the setting in the menu.
), left ( ) or right (
) or fast forward (
) or down (
4
).
), stop
) the play-back file.
) button to change
© 2009 Velleman Components nv
Rev. 01