GB
6. Manual disabling of the detector
It is possible to disable the detector for a 15 min period:
• prior to activities likely to produce smoke (sweeping of a
dusty room, of a chimney...) and cause unwanted alarm
activation,
• to stop alarm in the event of detection of non-dangerous
smoke.
In order to disable the detector, press the test key until the 1st
beep sounds or until the detector stops its built-in audible
alarm.
The indicator signalling the state of the detector flashes every
2 sec.
Red signal LeD
indicates the state
of the detector
the unit flashes once
Sensor shut down
other wired
the unit flashes once
inter-connected
detectors
After the 15 min disable period has passed, the detector is
automatically reset to normal operation with the detector state
indicator flashes every 10 s.
CAution: to leave shut down mode more quickly press the test button for about 10 s
until the alarm sounds (see reaction in the sensor test chapter).
White
indicator
LeD
-
every 2 sec.
-
every 10 sec.
Built-in audible alarm
-
-
44
CAution: for the 15 min
disable period, the detector
will not detect any smoke,
nor release any audible
alarm.