ClimaCity Pur Line Melibea Manual De Instalación página 3

E N
Read this manual before installation and use!
This document is part of the appliance
Read and follow the instructions in the user manual.
SIZE (LxPxH)
WEIGHT
CAPACITY
FUEL
MAX. BURNING TIME
MIN. ROOM VOLUME
Approx. Heating Output
DISTANCE to flammable
materials
CONTENT: - User manual
- Installation manual
- Brochure
- Wall mounting fireplace
- Wall mounting kit
- Toughened glass
- 3 ADJUSTABLE Burners
- Firekiller
Assembly
1. Mount the top bracket. Use a level to mark a straight line with a pencil on the wall where you will mount the
brackets. Drill holes into the wall. Place the plugs in the holes. Place the bracket over the holes and insert screws
through the bracket.
2. Measure the distance between the top holes and bottom holes on the rear interior of the fireplace.
3. Mount the low brackets taking into account the distance between the top and bottom holes in the rear of the
fireplace.
4. Seek help from a person to hold the fireplace on the mounted brackets, while inserting the screws and washers
through the holes in the brackets.
5. Make sure the fireplace is mounted in the correct position, and securely fixed to the wall.
6. Place the glass with the included screws.
7. Place the burners in the correct position, with the opening facing forward.
Follow the instructions for adding Bioethanol, ignition and extinction, and the safety norms in the attached user
manual. Enjoy the true Purline flame.
• Due to our policy of continuous product improvement, we reserve the right to discontinue or change product specifications or designs.
Melibea - WALL MOUNTING ETHANOL FIREPLACE
136x20.5x54 cm
33 kg
3 x 1,25 L L
Ethanol ≥ 95%
(Purline Liquid fuel for
ethanol fireplaces)
4 h.
75m
3
4,5 kW
100cm
For decorative and domestic use only.
Keep away from children.
Please be sure the wall you are placing this appliance can
bear its weight.
Installation only in a location which is protected against
cross-aeration/air draft.
Do not put any flammable items on top of the appliance.
Never mount the product on walls made of flammable
materials (a wooden or plaster board wall is e. g. not
suitable).
The vents on the back of the fireplace may not be covered or
obstructed when using the product.
Only hang the product on even, solid, and non-flammable
wall areas.
When installing the fireplace, seek the assistance of a
second person.
The included mounting material is intended for solid
masonry. If you are not sure as to whether the enclosed
mounting material is suitable for your wall, seek advice at
a qualified person prior to installing the fireplace and if
applicable, exchange it.
When inserting the fireplace compartment in the fireplace,
the burner opening must be facing forward, that is, towards
the opening on the fireplace.
Attention: Never place the burner in the Fireplace when
filled to prevent bioethanol from being inadvertently spilled.
* It is tecommended the use of a high quality ethanol
fuel for fireplaces, as our Purline fuel for fireplaces. The
use of other brands can invalidate the warranty. Always
follow the instructions and recommendations of the fuel
supplier.