IFM Electronic Efector 110 Instrucciones Operativas página 21

Function display
Operation LED
Error LED
Function LED
Characteristic values
Safety classification
AS-i profile
I/O configuration
ID code
AS-i certificate
EMC
Operating temperature
Relative humidity
Height above sea level
Protection
Housing materials
Housing dimensions
Connection
Data bits
D0...D3 (bidirectional)
Socket connection
Remarks
green; AS-i/external voltage supply
red; AS-i communication or periphery fault,
initialisation phase or error in evaluation
yellow; switching signal fail-safe switches or chain
state unsafe output
Category 4 to EN 954-1
80 x 90 x 46.5 mm (H x W x D)
to FC or FC-E coupling module
DI0...DI3: transmission of the safety code table
(0000 = safe state)
DO0: evaluation switched on/off
(0 = evaluation ON)
DO1: parameter setting depending on the type and
number of connected fail-safe switches
(see page 17)
DO2: logic state of the unsafe switching output O-3
(0 = O-3 OFF)
I-1
connection fail-safe switches
1: L+
2: TE (clock input)
3: L-
4: OUT (output signal)
5:
*) The device shall be supplied from an isolating source and
protected by an overcurrent device such that the limited voltage
circuit requirements in accordance with UL 508 are met.
EVALUATION UNIT
S-7.B.E
7 [Hex]
B.E [Hex]
61801
EN 50295
-25...+55° C
< 95%
max. 2000 m
IP 67
PBTP (Pocan)
contact pins
O-3
switching output PNP
1:
2:
3: GND
4: O-3
5:
G1506S
21
PAGE