Alesis SampleRack Guia Del Usuario página 9

Footswitch
The footswitch input of SampleRack supports both
standard 1/4" TS single-button and 1/4" TRS dual-button
footswitches.
The available footswitch functions are:
• Click: Starts/stops the metronome
• Stop All: Mutes all currently playing samples
• Next Kit: Selects the next kit
• Prev Kit: Selects the previous kit
• Tempo: Press the footswitch several times to
set the tempo of the metronome
Hi-Hat
• Position Settings: This submenu allows you to
adjust the hi-hat pedal ranges for the "HAT OPE",
"HAT MID", and "HAT CLO" trigger locations of
SampleRack.
MIDI
• Receive Channel: Sets the MIDI channel that
SampleRack will receive MIDI data. The available
parameters are All, or individual MIDI channels 1-16.
• Send Channel: Sets the MIDI channel that
SampleRack will send MIDI data. The available
parameters are individual channels 1-16.
• Receive
Program
SampleRack will react to program change messages
received on the MIDI Receive Channel. The available parameters are Yes and No.
• Send Program Changes: Sets whether SampleRack will send program changes over the MIDI Send Channel
when a kit is changed. The available parameters are Yes and No.
• MIDI Clock: Sets whether the SampleRack will send or receive MIDI Clock. This feature can also be set to
OFF.
Load Samples/Kits Via USB
• After this feature is selected, SampleRack will connect to your Mac or PC via the USB connection for easy SD
card management. To exit this mode, hold Cursor Left and Cursor Up on SampleRack for two seconds.
Other
• Pad Curve: Selects the velocity curve sensitivity
setting (1-8) to be used across all of the triggers. You
can audition the Pad Curve by striking a trigger while
changing this setting.
• Auto-Shutdown
SampleRack will remain powered on if there is no
activity. Select from 30 minutes, 60 minutes, or Off
(SampleRack will remain powered on until you manually
power it off).
Saving a Kit
1. Select the kit on the main screen that you have edited
and would like to save.
2. Press and hold the Cursor Down and Cursor Right
buttons for 2 seconds simultaneously to enter the
Save menu.
3. Move the cursor to the SAVE KIT option by pressing
the Cursor Up or Cursor Down buttons.
4. Press Cursor Right to enter the SAVE KIT submenu.
5. Press Cursor Up or Cursor Down to highlight "Yes" and then press Cursor Right to save the kit.
6. To exit the SAVE KIT submenu, press the Cursor Down until Exit is highlighted, and then press the Cursor
Right button. Alternatively, press and hold the Cursor Down and Cursor Right buttons to exit this menu.
Changes: Sets
Time: Selects how
whether
long
9