Panasonic AG-DV2500 Instrucciones De Funcionamiento página 56

MENU SCREEN
REMOTE menu
REMOTE menu
Items
LOCAL
FUNCTION
PREROLL
REM FF/REW
MODE
REM STOP SEL
PLAY DELAY
SYNCHRONI-
ZATION
CONTROLLER
SEL
E-56
– Contents of the menus –
Setting
NO KEY Use this to select the buttons on the main unit to be rendered operable
EJECT when remote controlling the unit via the 9 PIN REMOTE terminal:
STP + EJT NO KEY
ALL KEYS EJECT
STP + EJT : Only the STOP button and the EJECT button are ena-
ALL KEYS : All operation buttons are enabled.
3SEC When remote controlling the unit via the 9 PIN REMOTE terminal, use
5SEC this item to set the PREROLL time of the unit. Configurations done via
7SEC the editing remote controller prevail over other settings:
10SE 3SEC
5SEC
7SEC
10SEC
Memo
To enhance editing precision, please set it to at least 7 seconds.
FF/REW Use this menu item to set the action to be performed when an FF/REW
SEARCH command is received via the 9 PIN REMOTE terminal or DV terminal:
FF/REW
SEARCH
EE Use this menu item to set the action to be performed when a STANDBY
PB ON command is received via the 9 PIN REMOTE terminal or DV termi-
nal:
EE: Sets the unit to the EE mode. (The unit will go into the STOP mode.)
PB: Sets the unit to the PLAY mode. (The unit will go into the STILL
mode.)
0F Use this menu item to adjust the edit timing. When the remote control-
| ler is used, there will be a slight delay time before edit starts. To rectify
15F the time discrepancy, adjust the timing for starting playback:
0F
1F to 15F : Delay by the number of frames set by the user. When this
OFF Use this setting to turn on/off the BUMP function when the unit is con-
ON nected to an editing remote controller:
OFF : No synchronization.
ON : Execute synchronization. The editing precision is enhanced .
Please set the pre-roll time to at least 7 seconds.
TYPE1 When remote control is executed via the RS-422A interface, use this
TYPE2 menu item to set the type of controller connected:
TYPE3 TYPE1 : Remote controller not of PANASONIC
TYPE4 TYPE2 : Remote controller not of PANASONIC
TYPE5 TYPE3 : AG-A850, AJ-A95
TYPE6 TYPE4 : Remote controller not of PANASONIC
TYPE7 TYPE5 - TYPE7 : (not in use)
Contents
: No button enabled.
: Only the EJECT button enabled.
bled.
: 3 seconds
: 5 seconds
: 7 seconds
: 10 seconds
: Sets the unit to execute FF/REW when a command is
received. This is the usual setting.
: Sets the unit to go into the SEARCH state when a com-
mand is received. Use this setting if the locate(cue up)
function does not work well.
: No compensation.
unit is connected to an editing remote controller with no
BUMP (synchronization) function, use this setting to ad-
just the editing precision.
(continued)