E
I
(6 used in this step)
M4 x 25 mm
(2 used in this step)
20. Stand the assembled unit upright.
21. Fasten both Upper Front Panels (E) and Lower Front Panels (H and I) to the Center Shelf (B) by
engaging six Cam Locks (1).
22. Insert two 25 mm Screws (6) through the countersunk holes on the Lower Front Panels (H and I) and
securely screw into the Middle Crossbar Assembly (J) as shown.
23. Using the pilot holes as a guide, fasten two Metal Brackets (9) at the joints between the Middle Crossbar
(J) and Lower Front Panels (H and I) with two 12 mm
Assembly Instructions
E
A
J
B
H
Cam Lock
①
Screw
⑥
9
M3.5 x 12 mm
Flat Head Screw
(4 used in this step)
Metal Bracket
(2 used in this step)
Screws (5) per plate.
Flat Head
21
E
1
H/I
6
5
⑤
⑨
1