Maytronics CLASSIC 8D-UNI Instrucciones Para El Usuario página 8

English
Reinstall the filters according to the diagram
DO NOT FORCE THE FILTERS INTO PLACE.
Part 2 - Dismantling and cleaning the impeller
Unplug power supply before any servicing activity.
Dismantle the impeller cover and clean around the impeller housing, then reassemble.
1
Section 4 – Storage Advice
Coil the cable and store in dry cool area – preferably on the Caddy if available.
Do NOT store the Robot Pool Cleaner exposed to direct sunlight.
Do NOT store the Robot Pool Cleaner exposed to excessive heat.
Do NOT store the Robot Pool Cleaner exposed to frost.
8151622.indd 6
Recommendation: Rinse all brushes with clean water after each cleaning cycle.
2
Grooved end fitting
3
Octagonal end fitting
6
29/01/13 1:04 PM