General Safety Information - World Dryer AirStyle B Serie Instructions

Description
World Dryer AirStyle surface mounted and recessed mounted warm air hair dryer, powered by a high speed universal motor,
delivering 2300 Watts of drying power. This hair dryer runs on 115 Volts AC, 208/220-240 Volts AC, or 277 volts AC electrical supply,
depending on model. Push-button models are represented in this product group. This appliance is intended for hair drying. This hair
dryer may be used in schools, clubs and public facility environments.
Basic Models Nozzle
RB Rotating Nozzle
B Rotating Nozzle
DB Rotating Nozzle
Models Type
B, RB, DB Push-button
B1, RB1, DB1 Push-button
B3, RB3, DB3 Push-button
B7, RB7, DB7 Push-button
B38, RB38, DB38 Push-button
(cULus Listed, E19860, CE TUV-GS)

General Safety Information

DANGER
• Always disconnect the power source before servicing or installing the hair dryer.
DANGER
dryer's wall base.
• We recommend GFCI protection in wet or damp locations or as required by local code.
WARNING
• Connect the hand dryer to the nearest suitable distribution panel.
• Do not connect to a branch circuit with CB or fuse protection over 20 Amps. This is in compliance with The National Electrical Code.
CAUTION
Unpacking
1. Remove all packing material. Recycling is recommended.
2. Carefully remove the hair dryer from the shipping carton, using care not to drop the appliance.
3. Inspect carefully for any damage that may have occurred during transit. Check for any loose, missing or damaged parts. If the hair
dryer is damaged, promptly inform the shipper or dealer where you purchased it.
Drying Cycle Dimensions (WxDxH)
80 Seconds 13.1" x 13.8" x 4"
80 Seconds 11.3" x 9.6" x 8.1"
80 Seconds 11.3" x 9.6" x 8.1"
Electrical Input
110-120 V, 60 Hz
110-120 V, 60 Hz
208-240 V, 60 Hz
277 V, 60 Hz
220-240 V, 50 Hz
Failure to disconnect the power source before installation or servicing can
result in serious injury or death from electric shock.
Failure to properly ground this unit could result in severe electrical shock
and/or death.
NEC codes or safety recommendations are not followed.
Improper mounting could result in personal injury or property damage.
333 mm x 351 mm x 102 mm
287 mm x 244 mm x 206 mm
287 mm x 244 mm x 206 mm
Amperage
20
15
10
8.5
10
.
2
Weight Cover Material
28.6 lbs / 12.9 kgs Cast Iron
27.3 lbs / 12.4 kgs Cast Iron
15.6 lbs / 7.1 kgs Steel
Watts
2300
1725
2300
2300
2300