Rational UltraVent XS 6 2/3 E Instrucciones De Instalación página 31

Installation instruction
Combi-Duo
Before mounting the UV:
mains.
Retrofitting:
Using the retrofit kit Combi-Duo 60.73.945 the
UV can be modified for use on a Combi Duo.
> Disconnect all units of the Combi Duo from
> Disconnect UV from mains
> Remove 5 screws at rear side of UV.
> Pull out the control box
> Break off one of the perforated openings in the
base panel of the UV. Feed the bus cable through
the opening.
> Connect the bus cable to the free bus terminal.
> Connect the cable gland.
> Insert the control box
> Fix the 5 screws at the rear side of the UV
GB
31