Installation - Klarstein 10030106 Manual Del Usario

Step 6
Step 7
Step 8
Kits for installation
Guide 2x
19
Remove bottom hinge pin from right to left.
Re-fit the door and then upper hinge on left side. Ensure the door is aligned ho-
rizontally and vertically, so that the seals are closed on all sides before finally
tightening the upper hinge. If necessary, a spanner to tighten the hinge.

Installation

Cover 2x Slider 2x
Unscrew top hinge pin from the hinge.
Then turn the hinge over and screw
hinge pin.
Cover 2x Short Screws
13x
Long Screws Seal 1x
2x