Bruno SRE-2010 ELITE Manual Del Operador página 8

OPERATION: power swivel seat (optional)
©Bruno Independent Living Aids, Inc.
keyswitch
8
®
POWER SWIVEL SEAT
1. Turn the carriage keyswitch to ON.
2. At the top of the stairs, swivel the seat.
a. Position yourself in the seat.
b. Fasten the positioning belt.
c. Rotate the seat so that you are at
right angles to the rail (with your
back to the stairway wall).
A safety switch prevents operation of
the SRE-2010 unless the seat is locked
in position at right angles to the rail
(the "riding" position).
3. Position both feet securely on the footrest
and place your arms on the armrest cushions.
4. Press and hold the rocker switch (located
on the front edge of one of the armrests)
to travel UP / DOWN the rail.
5. Once you have reached the top or bottom
landing, release the rocker switch.
6. To rotate the seat at the top landing,
press the rocker switch again on the
same side.
7. Release the rocker switch when you have
fully rotated out.
8. Unbuckle the positioning belt and carefully
exit the seat.
NOTES:
• You may use the remote transmitters to
return the rotated power seat back to
the ride position.
• If the unit stops unexpectedly while
traveling, check for obstructions or
excessive loading. You will only be able
to run the unit in the opposite direction
until the overload is cleared.
SRE-2010 OPERATOR 02-08-2019