Connect The Cables - Axis S1032 - Axis Communications S1032 Guia De Instalacion

Page 6

Connect the Cables - AXIS S1032

Warning: Before you begin any of the procedures in this section, read the safety information that
shipped with your computer. For additional information, see www.axis.com
NOTE: Some devices may not be included if you did not order them.
1. Connect the keyboard, mouse and monitor. The connectors on the back of your system have
icons indicating which cable to plug into each connector. Be sure to tighten the screws (if any)
on the monitor's cable connector.
2. Connect the system's power cable(s) to the system and, if a monitor is used, connect the
monitor's power cable to the monitor.
AXIS S1032/AXIS S1048 Installation Guide