Papago GoSafe 770 Manual De Usuario página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4. Settings
Press the
● Record Mode
a. Automatic Recording
b. Monitor Mode: When this mode is selected, your device will take
snapshots every second while recording.
c. Motion Detection: When this mode is selected, recording starts when
dash cam detects movement. If there is no movement for more than 60
seconds, recording will stop and be switched to detection mode.
This function only works when the device has a continual power
source after the vehicle´s engine is turned off.
●Driving Safety
a. Stop Sign Recognition:The device will recognize any Stop Sign and
warn you with a beep.
b. Stop & Go:After you stop for at least 10 seconds (as for red lights), the
device will detect when the car in front has proceeded and it will give an
audio alert to remind you to proceed driving as well.
c. Driver Fatigue Alarm:When activated, the user can setup an alarm
clock, periodically reminding you to rest. Options available are : 30
minutes/1 hour/2 hours/4 hours/off.
d. Light Reminder : When activated, if driving in a dark environment (such
as tunnel or parking structure), it will have an audio alert and display
the light alert icon on the screen. The alert can be turned on/off.
● Volume : Set Volume.
● Microphone : Enable or disable voice recording.
button to enter "Settings".
English 9

Publicidad

Tabla de contenido
loading

Tabla de contenido