Initial Configuration - AKO 16523 Guía Rápida

Initial configuration

The first time the unit receives the power supply, it will enter into
ASSISTANT mode. The display will show the message In{ flashing with 0.
Step 1:
Select the most suitable InI option based on the type of installation to be
carried out and press SET. The available options will be shown in the
following table:
Type of installation
In{
Cold control
0 Demo mode: displays the temperature but does not regulate temperature or activate relays.
Solenoid
1
Solenoid + compressor
2
3 Solenoid + compressor
4 Solenoid
Solenoid + compressor
5
6 Solenoid + compressor
7 Solenoid + compressor
Solenoid + compressor
8
9 Solenoid + compressor
10 Solenoid + compressor
Solenoid
11
12 Solenoid + compressor
13 Solenoid + compressor
Step 2:
Use keys N and Q to enter the desired Set Point value and press SET.
The wizard has finished. The unit will begin to regulate the temperature.
The wizard will not reactivate. To reactivate it, activate Stand-
By mode by pressing the m key for 3 seconds and wait until
the unit completely halts regulation (The m indicator will light
up permanently) and press keys N, Q and SET in sequence.
N, Q, SET.
If this is not the first time you initiate the wizard, after completing the last
step the display will show the message dFp (parameters per defect). You may choose between two options:
0: Only changing the parameters which affect the wizard. The other parameters will remain the same.
1: All parameters return to their factory setting except those which have been modified by the wizard.
Pump
Evaporator
Defrost
Down
No Electric
Yes Electric
No Electric
No Air
Yes Air
No Air
Yes Hot gas
No Hot gas
Yes Reversal of cycle
No Reversal of cycle
No Static
Yes Static
No Static
1
CORE
Parameters
Pd o00 I00 I10 I20 d1 d7 F3
fans
Yes 0 * 2 0
Yes 1 1 2 7
Yes 0 1 2 0
Yes 0 * 1 0
Yes 1 1 1 7
Yes 0 1 1 0
Yes 1 1 2 7
Yes 0 1 2 0
Yes 1 1 2 7
Yes 0 1 2 0
No 0 * 1 0
No 1 1 1 7
No 0 1 1 0
2
CORE
13
1652H311 Ed.03
CORE
Diagram
to be
used
0 20 0 0 A
0 20 0 0 B
0 20 0 0 B
0 20 1 1 A
0 20 1 1 B
0 20 1 1 B
9 5 2 0 C
9 5 2 0 C
0 5 3 0 D
0 5 3 0 D
0 20 1 - A
0 20 1 - B
0 20 1 - B
CORE