Attachment Of Electrode Lead Wires; 23 3. Operating Instructions - Gima AD-2026 Guía De Uso

rechargeable batteries are not suitable for this device.
remove the batteries if the monitor will not be used for a
month or more to avoid relevant damage of battery leakage.
please do not mix use new and old batteries or different type
of batteries.
please do not throw battery into fire.
the device and the batteries, must be disposed of
according to local regulations at the end of their usage.

2. attachment of electrode lead wires

a. the wires provided with the ad-2026 insert into the jack
sockets located on top of the device. holding the insulated
portion of the
into one of the jacks;
b. after connecting the wires to the stimulator, attach each
wire to an electrode.
wires. Jerking the wire
connector body may cause wire
c. place the electrode on your body as directed by your
physician. clean the wires by wiping with a damp cloth.
coating them lightly with talcum powder will reduce tangling
and prolong life.
3. operating instructions
press the "on/oFF" button, the device will be put on, the lcd
a.
light all display for 1 second, then the device go into standby mode
and wait for your settings.
b. First, set the time of therapy. press the Mode button to
changing-timer
the Mode+ button
Mode- button to decrease the therapy time.
the timer can be change from 1 minute to 30 minutes,
defaulted time
c. Second, select the mode of therapy. press the Mode button
to changing- mode mode which is 'hand' sign in lcd, then like changing of
ENGLISH
connector, push the plug end of the wire
one or two sets of wires may be used.
use care when you plug and unplug the
instead of holding the insulated
mode which is 'clock' sign in lcd. then press
to increase the therapy time or press the
is 15 minutes.
breakage.
24