Setting The Room Code; Performing A System Reset - Bose WAVE MUSIC SYSTEM-SOUNDLINK Guía De Usuario

TAB 8 TAB 7
P W
ERSONALIZING YOUR AVE

Setting the room code

®
Your Wave music system comes from the factory
ready to operate as a second room (room code B)
when connected to a Bose
system. If you want to use your Wave
with your Lifestyle ® system beyond a second room you
will need to change the room code to match that of the
remote control you are using for that room.
®
Refer to your Lifestyle system owner's guide for more
information on room codes.
1. Press and hold Alarm Time (Menu) until
SETUP MENU is displayed.
– –
2. Press Tune/MP3 six times until
ROOM B is displayed. The
–
dashes following the room letter
indicate how the microswitches should
be set on the Lifestyle
3. Press Time – or Time + to select a
room code other than room B.
4. Press Alarm Time (Menu) to exit the
setup menu or wait 10 seconds for the
setup menu to end automatically.
20
TAB 6 TAB 5
®
MUSIC SYSTEM
® link enabled Lifestyle ®
® music system
® remote control.
TAB 4 TAB 3

Performing a system reset

If you wish, you can restore your Wave
the original factory settings.
1. Press and hold Alarm Time (Menu) until
SETUP MENU is displayed.
– –
2. Press Tune/MP3 seven times until
RESET ALL NO is displayed.
–
3. Press Time – or Time + to change
RESET ALL NO to RESET ALL
–
YES.
4. When PRESS 2 TO CONFIRM
appears on the display, press
Presets button 2. When the reset
is complete, DEFAULTS RESET
is displayed.
5. Press Alarm Time (Menu) to exit the
setup menu or wait 10 seconds for the
setup menu to end automatically.
TAB 2 English
®
music system to
–