Care & Cleaning - Panasonic CS-S9JKQ Instrucciones De Operación

CARE & CLEANING CARE & CLEANING
• Switch off the power supply and unplug before cleaning.
• Do not touch the aluminium fi n, sharp parts may cause injury.
CAUTION
WASHING INSTRUCTIONS WASHING INSTRUCTIONS
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
ALUMINIUM FIN ALUMINIUM FIN
e-ion FILTERS e-ion FILTERS
• Clean the fi lters regularly.
• Wash/rinse the fi lters gently with water to
avoid damage to the fi lter surface.
• Dry the fi lters thoroughly under the shade,
away from fi re or direct sunlight.
• Replace any damage fi lter.
FOR SEASONAL INSPECTION AFTER EXTENDED FOR SEASONAL INSPECTION AFTER EXTENDED
NON-USE NON-USE
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select Cooling operation.
After 15 minutes of operation, it is normal to have the following
temperature difference between air inlet and air outlet vents:
Cooling: ≥ 8°C
FOR EXTENDED NON-USE FOR EXTENDED NON-USE
• Activate e-ion operation for 2~3 hours as an alternative to
remove moisture left in the internal parts thoroughly.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
6
Remove Remove
HINT HINT
• To ensure optimal performance of the unit, cleaning
maintenance have to be carried out at regular intervals.
Dirty unit may caused malfunction and you may retrieve
error code "H99". Please consult authorized dealer.
FRONT PANEL FRONT PANEL
Remove Front Panel
• Raise and pull to remove the front
panel.
• Wash gently and dry.
Close Front Panel
• Press down both ends of the front
panel to close it securely.
e-ion e-ion CHARGING WIRE CHARGING WIRE
INDOOR UNIT INDOOR UNIT
Wipe the unit gently with a soft, dry cloth.
ACTIVE e-ion GENERATOR ACTIVE e-ion GENERATOR
NON SERVICEABLE CRITERIAS NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY AND UNPLUG then
please consult authorized dealer under the following
conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote
control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
Clean with dry cotton bud.
• Active e-ion generator
cleaning is recommended
every 6 months.