Epson ELPMB61 Guia De Instalacion página 26

Installation Procedure
d
When you have finished making adjustments, securely tighten the screw for the ball joint
section with a hexagonal wrench (M6).
c
•
After making adjustments, make sure you tighten the screws of the ball joint completely. If they are
not tightened completely, the angle of the projector will change shifting the position of the image.
•
After adjusting the orientation of the projector, adjust the size and focus of the projected image. For
more details, see the User's Guide supplied with the projector.
24