Section - A
Problem
No Power.
Motor will not start.
Interlock not depressed.
Defective switch / bad connection.
Low voltage from excessive length or
undersized extension cord.
Defective start capacitor.
Motor fails to start /
runs sluggish.
Defective start switch.
Defective run capacitor.
Defective motor.
Low voltage.
Fuse / circuit breaker
repeatedly trips.
Bad connection.
Defective motor.
Troubleshooting
Possible Cause
Check power supply and connection.
Depress interlock before activating control lever.
Contact an authorized American Sanders Dealer.
Use a 12 Ga. extension cord, not to exceed 50 feet (15m) length.
Contact an authorized American Sanders Dealer.
Contact an authorized American Sanders Dealer.
Contact an authorized American Sanders Dealer.
Contact an authorized American Sanders Dealer.
Eliminate extension cord.
Locate power source closer to work site.
Have voltage checked by a qualified electrician.
Contact an authorized American Sanders Dealer.
Contact an authorized American Sanders Dealer.
10
English - EN
Action