HP 10/100 3Com 3C905B-TX Guia De Instalacion página 15

HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
5 Double-click on
Network Adapters
interface card appears:
3Com EtherLink XL Adapter (3C905B).
If this name does not appear or if a yellow exclamation mark appears
next to it, follow this troubleshooting procedure:
a In the
Device Manager
b Click PCI Ethernet Controller or the duplicate
3C905B-TX NIC entry.
c Click on
Remove
d Restart your PC.
Software Installation and Update on a Windows NT 4.0 System
This section describes how to install the network driver in a PC
workstation running Windows NT version 4.0. Before you begin, obtain
EtherDisk diskette #2 and Windows NT installation files (stored under
on systems preloaded with Windows NT 4.0).
C:\I386
If Windows NT networking is not installed, you may also need the
following information from your MIS department:
Whether you are on a LAN or are connecting to one through a
•
modem
The protocol used in the Microsoft Windows Network (typically
•
TCP/IP or NetBEUI)
The name of the Windows NT server domain or workgroup you
•
belong to
Your IP address if you are not using DHCP
•
. The name of the installed network
window, double-click on
.
Software Installation Procedure
.
Other Devices
English 11