Timekeeping Mode; Functions; Setting Time And Date - SUPERDRY SPORT Digi Manual De Instrucciones

Accuracy
- The most accurate counting state for the step counter is between 100-150 steps/min. If too fast or too
slow accuracy will decline - so ensure to change the sensitivity to HIGH, LOW or MIDDLE when necessary.
- The pedometer does not count non-standard steps as it simulates the usual motion when you walk or run.
You should wear the watch before you begin walking or running. If not, the data may not record correctly.

5. Timekeeping Mode

Functions

In the timekeeping mode you have 5 different functions to cycle between. Press UP button to cycle between
each function.
Date / Time
Press UP
Alarm 1 Alarm 2 Stopwatch Countdown Timer

Setting Time and Date

- In timekeeping time/date display, hold MODE button until 12H/24H indicator starts to flash.
- Press UP or DOWN button to adjust the flashing value.
- Hold UP or DOWN button to adjust the flashing value quickly.
- Press MODE button to cycle through settings, as below diagram.
NOTE: The flashing unit is the one which will change - shown below in GREEN.
PM
PM PM PM
12H/24H Hour Min Second
Press MODE
Hourly Time Signal Day Month Year
On/Off
7