Drying; Material Resistance; Storage - Drive Voyager Pro 18018 Manual Del Usuario

Drying

．Place the individual components on a dry, clean and absorbent surface and
allow to dry completely (for at least 2 hours).
Note:
Ensure that all parts are thoroughly dried after cleaning, otherwise there is
an increased risk of bacterial growth.
Once all components are fully dried, reassemble the nebulizer and place the
components in a dry, sealed container.

Material Resistance

．When choosing a cleaning or disinfecting agent, note the following:
Only use mild cleaning or disinfectant agents in the quantities
recommended by the manufacturer.
．As with all plastic components, frequent use and cleaning of the accessories
can lead to a certain amount of wear. Over time, this can alter the aerosol
properties and may eventually affect the efficiency of therapy. We therefore
recommend that you replace the nebulizer cup and accessories at least
once a year.

Storage

．Do not store the nebulizer in a damp atmosphere (e.g. in the bathroom) or
transport it together with damp objects.
．Store and transport the nebulizer away from direct sunlight.
19