Mode 1: Upright Vac - Shark NV370 Guia Del Usuario

Mode 1: Upright Vac

To reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or
converting modes.
WARNING: The On/Off switch is on the top of the Lift-Away
("O" position) before plugging and unplugging.
Fig. 8
TO ASSEMBLE:
1
Place the floor nozzle on a level surface.
2
Align the tube of the floor nozzle with the tube on
the Lift-Away canister and lower until you hear the
®
two pieces click into place. (Fig. 8)
When attaching the motorized floor brush, ensure
that the latching mechanism is fully locked in place
to ensure electrical connection has been made.
3
Attach the end of the extension wand to the tube on
the back of the Lift-Away
place. (Fig. 9)
4
Slide the accessory holder (a) positioned opposite
the upper cord wrap, over the extension wand. Align
the tab with the groove and push down. (Fig. 10)
12 TOLL FREE: 1-800-798-7398
Fig. 9
canister until it clicks into
®
canister. Always ensure the power is OFF
®
Upper Cord
Storage Wrap
c
Fig. 10
5 Push the handle (b) onto the top of the extension
wand until you hear it click into place. (Fig. 10)
6
Insert the end of the stretch hose (c) into the
connector on the back of the Lift-Away
(Fig. 10)
7
Store the dusting brush (d) and the crevice tool (e)
on the mounts of the accessory holder.
(Fig. 10)
b
d
a
e
canister.
®