Figure 17.- DEIDE equipment: Description of rear panel connectors.
[1]
Power on switch
[2]
Mains cord connector
[3]
Data connector digital video output
[4]
TFT power supply
[5]
Antenna adapters connector
[6]
ETHERNET connector
[7]
USB connector (GPS)
[8]
USB connector (internal use)
4.- Connect an adapter for antenna on the suitcase rear panel connector [5] (see
Fig.17).
REMARK: An antenna or source of suitable signal: FM, DAB, analogue or digital
TV not included with the equipment, must be available.
5.- The rear panel connector [3] located at the transport suitcase (See Fig.17) allows to
obtain a suitable video output to be connected to the TFT monitor.
6.- Connect GPS receiver to USB port [7] from rear panel (See Fig. 17). Making sure
that following three cables are installed, in agreement with the original settings: one
connected to the USB Port [8], other one connected to the TFT screen power
supply [4] and finally the last one connected to digital video output [3].
Page 20
DEIDE EQUIPMENT. USER'S MANUAL
11/2005