Glossary; Maintenance - Emerson LC320EM82 El Manual Del Propietario

I
NFORMATION

Glossary

ATSC
Acronym that stands for Advanced
Television Systems Committee and
the name of the digital broadcasting
standards.
Aspect Ratio
The width of a TV screen relative to its
height. Conventional TVs are 4:3 (in
other words, the TV screen is almost
square); widescreen models are 16:9
(the TV screen is almost twice as wide
as its height).
Component Video
This is a video signal format that
conveys each of 3 principal colors of
light (red, blue and green) through
different signal lines. This allows the
viewers to experience picture colors
as original as it is. There are several
signal formats, including Y / Pb / Pr
and Y / Cb / Cr.

Maintenance

Cabinet Cleaning
• Wipe the front panel and other exterior surfaces of the unit with a
soft cloth immersed in lukewarm water and wrung dry.
• Never use a solvent or alcohol. Do not spray insecticide liquid near
the unit. Such chemicals may cause damage and discoloration to
the exposed surfaces.
Panel Cleaning
Wipe the panel of the unit with a soft cloth. Before cleaning the
panel, disconnect the power cord.
Servicing
Should your unit become inoperative, do not try to correct the
problem yourself. There are no user serviceable parts inside. Turn
off the unit, unplug the power cord and call our toll free customer
support line found on the cover of this manual to locate an
authorized service center.
34
EN
Dolby Digital
The system developed by Dolby
Laboratories to compress digital
sound. It offers stereo sound (2ch) or
multi-channel audio.
HDMI (high-definition multimedia
interface)
Interface that supports all
uncompressed, digital audio/video
formats including set-top box, DVD
player or digital television, over a
single cable.
HDTV (high definition TV)
Ultimate digital format that produces
high resolution and high picture
quality.
NTSC
Acronym that stands for National
Television Systems Committee and
the name of the current analog
broadcasting standards.
IR Signal Check
If the remote control is not working properly, you can use an AM
radio or digital camera (including a cellular phone with built-in
camera) to see if it is sending out an infrared signal.
• With an AM radio:
Tune the AM radio station to a non-
broadcasting frequency. Point the remote
control towards it, push any button and
listen. If the sound from the radio fl utters,
it is receiving the remote control's infrared
signal.
Password
A stored 4-digit number that allows
access to parental control features.
SAP (secondary audio program)
Second-audio channel delivered
separately from main-audio channel.
This audio channel is used as an
alternate in bilingual broadcasting.
SDTV (standard definition TV)
Standard digital format that is similar
to the NTSC picture quality.
S-video
Offers higher quality images by
delivering each signal, color (c) and
luminance (y) independently of each
other through separate cables
• With a digital camera
(including built-in cell phone cameras):
Point a digital camera towards the remote control.
Push any button on the remote control and look
through the digital camera. If the infrared light
appears through the camera, the remote control is
working.
.