Automatic Defrost; Overload Protection - mundoclima MUPO-07-C10 Manual De Instalación Y Usuario

5.4.9. Automatic Defrost

At low room temperatures, frost may buildup at the evaporator during
operation. The unit will automatically start defrosting and the POWER
LED blinking. The defrost control sequence is as follows:
A. When the unit operates in the cooling operation, drying operation, the
ambient temperature sensor senses the evaporator coil temperature is
below -1°C, after the compressor will stop operating for 10 minutes or
the coil temperature up to 7°C, the unit restart to cool operating mode.
5.4.10.
In the event of a power loss, to protect the compressor there is a 3
minute delay until the compressor restarting.

Overload Protection

62