Inserting The Batteries; Fixing The Keypad - SOMFY 2401241 Manual De Instrucciones

Inserting the batteries

1
Open the cover
by removing the two
screws on the sides.

Fixing the keypad

This must be inside the dwelling. We recommend that
you install the keypad near an entrance to your home (front
door, back door, garage, etc.), approximately 1.50 m from
the ground to enable use by a child.
1
Use the base as a drilling template.
Fix the electronic unit to the wall and not to
any metal section.
o
pening for
tamper strip
Ø 5 mm
Copyright © 2015 Somfy SAS. All rights reserved.
HAUT TOP
51 mm
BAS DOWN
2
Insert the
4 LR03 alkaline
batteries supplied,
making sure that
they are the right
way round (+/-)
and that the ends
of the batteries are
touching the battery
contacts.
The 2 indicator
lights light up
simultaneously for
2 seconds and the
keypad emits
3 BEEPs!.
2
Clip the keypad to
the base.
Affix the tamper
strip firmly
against the wall.
Tighten the 2 screws on
the sides.
3