Connect The Power Cable To The Camera - Axis T92A10 Guia De Instalacion

AXIS T92A10 Installation Guide
Connect the power cable
4
to the camera
1. Insert the red (+) and black (GND)
wires in the green terminal connec-
tor and tighten screws to secure
wires (fig.3 and fig.4).
2. Connect the green terminal
connector to the Axis network
camera (fig.4).
Note:
The camera models have different
terminal connectors; be sure to fol-
low the correct description for the
installed camera.
Red/black power cable
+ / GND Wire
+ Red
GND Black
FIG.3
Connector board
DC Power (+)
GND
+12V DC red
GND black
camera
GND
+
Camera
Camera DC Power (+)
Camera (GND)
Page 7
Power to