A
NSWERING MACHINE FUNCTIONS
Recording a custom greeting
1. Press and hold the
sounds. Continue holding down the button.
2. Start the greeting immediately after hearing the
tone. The display will show
Keep a distance of approximately six inches from the
microphone while recording. The display will ash
during the last ten seconds available for recording to
indicate that recording time is nearly over.
3. Release the
greeting is played back automatically.
4. The display will show
for the custom message can be adjusted. Use the UP
VOLUME and DOWN VOLUME buttons to adjust the
volume.
Play back the custom greeting at any time by brie y
pressing the
Deleting the custom greeting
1. Press and hold the
sounds, and immediately release the button.
2. The pre-recorded standard greeting will play, indicating
that the custom greeting has been deleted.
10
button until the recording tone
button when nished recording. The
R1
to indicate that the volume
button.
button until the recording tone
R1
during the recording.
R1
Service Center