bewell connect MyBabyScale Manual De Instrucciones página 17

First use
Remove the cover from the battery compartment underneath the
device. Insert 2 1.5V LR06-AA type batteries. Turn on the baby scale
using the "on/off" button.
Choosing the unit of weight
After pressing the on/off button to turn on MyBabyScale, press the
"on/off" button again to choose the unit of weight in "lb & oz" or
"kg" before the figure "0.00" appears on the screen.
Attaching the tray (FIG. 1) or disc (FIG. 2) to the base
Turn the base upside down. Unlock the locking mechanism (FIG. 3)
by turning it to open. Insert the tray or the disc into the base using
the notches. Turn the locking mechanism (FIG. 3) to close while hol-
ding the scale or disc in place. Make sure that the tray is securely
locked before weighing the child.
1
Starting up
- Place the baby scale on a flat, solid surface, making sure that it
is stable and that nothing touches it. Press the «on/off» button.
- On first use, the figures flash during weighing. The baby's weight
is displayed on the screen at the same time as the word "hold". The
scale will turn off automatically. On subsequent uses, the previous
weight recorded is displayed at startup.
- To perform another weighing, remove the baby from the scale. Press
the "hold" button until the "0.00 lb" figure appears on the screen.
BewellConnect - BW-SCB1 - User Manual - 012017v1
2
3
17