Alarm.Com ADC-721W Guia De Instalacion

Required Items for Installation:

ADC-V721W camera and power adapter (included)

Broadband (Cable, DSL, or Fiber Optic) Internet
connection with Wi-Fi router

A Wi-Fi enabled Computer, tablet or smartphone

Login/Password for the customer's Alarm.com account

If the router does not have a WPS button, and the
camera will be connected to a wireless network, you
will need the case-sensitive SSID (wireless network
name) and the network WEP or WPA key (if encryption
is enabled at the router)
For install help go to: Alarm.com/721Help
Install the Camera(s):
1. Connect the camera's AC adapter and plug it into a non-
switched outlet.
2. From a computer or smartphone, connect to the Wi-Fi
network named "ALARM (##:##:##)." The numbers in
parentheses will be last 6 digits of camera's MAC
3. From a web browser type in "http://V721install" and
press enter.
4. This should direct you to the camera's internal
configuration website. Follow the on-screen instructions
to connect the camera onto a wireless network.
5. From a computer on the same network as the camera,
login to the customer's account at
www.alarm.com/login.
6. Type www.alarm.com/addcamera into the web
browser's address bar and follow the on-screen
instructions to add the camera to the Alarm.com
account.
Contact Alarm.com Dealer Support at support@alarm.com or find your local number
Questions?
at the following website http://alarmadmin.alarm.com/Support/Phone.aspx
Outdoor Wireless Night Vision Camera
US and Canada: 1.866.834.0470 | MX: 001.855.300.9897
Alarm.com, Inc. ©2000-2014 All rights reserved.
INSTALLATION GUIDE
WPS Button Key (press and hold for):
Reset Camera
WPS Mode
Wireless AP mode
LED Status Description
All off Power off
Power on, system
Solid Red
booting
Local network
Green blink
connection with local
every second
IP address
Full internet
Solid Green connection with
Alarm.com IP
Blinking Blue WPS learn-in mode
Wi-Fi access point
Blinking White
mode
Solid Red
No local or Internet connection
Red blink every
0.15 second +
Restoring factory
Green blink
default settings
every 0.15
second
EZ.INSTALL
www.Alarm.com
(ADC-721W)
15 seconds
3-5 seconds
5-7 seconds
___________
TM