H.Koenig AXO900 Manual De Utilización página 4

1. Before assembling the cleaner, please confirm all parts and components for the cleaner are
received by referring to Parts and Components List.
2. Please remember to cut off the power supply before assembly.
Assembly of hose
1. As is shown in Figure (3), insert the hose into the duct inlet of the machine body in horizontal
direction. Please pay attention to the alignment of two projecting parts. Turn the hose right
when it is pushed into the bottom, a click of inserting sound may be heard, i.e. the hose is
assembled into the machine body completely.
2. Assembly and Removal of dust barrel
As is shown in Figure (4), place the bottom of the dust barrel on the projecting part at the front
end of the machine body, and press down the dust barrel. When the front-end hook is entered
into the corresponding part of the machine body completely, and a click of inserting sound is
heard, which indicate that the dust barrel is assembled in place. To remove the dust barrel, press
down the handle of the dust barrel; when the handle is pressed down to the bottom, the dust
barrel can be lifted to remove.
Assembly Instructions
Figure (4)
Figure (3)