Belkin TuneCommand AV Manual Del Usuario página 7

LED Chart
Every time you push a button on the Remote Control, the green lights on the Remote Control and
the Dock will blink, indicating that the signal has been received correctly.
If the Remote Control and the Dock are too far apart to communicate, the light on the Remote
Control blinks orange (after a short delay) instead of green when you press a button. The light on
the Dock will not blink.
The Remote Control's battery level is automatically checked after every button press. If the battery
level is low, the Remote Control's red light will blink, following the green or amber blink. If you see
this happen, the low battery should be replaced soon with a new one of the same type (CR 2032).
Your TuneCommand AV will continue to function normally until the battery is exhausted.
GREEN The receiver receives the signal
ORANGE Out of range
The battery is out
GREEN Received the signal
EN
LED Chart | 07