Step 3: Configure The Adsl Gateway - Linksys Instant Broadband Serie Guia De Inicio Rapido

D. Select Internet Protocol
(TCP/IP), and click the
Properties button.
E. Select Obtain an IP address
automatically. When the
new window appears, click
the OK button. Click the OK
button again (or the Close
button if any settings were
changed) to complete the PC
configuration.
F. Restart your computer.
Proceed to Step 3: Configure the ADSL Gateway.
14
Instant Broadband
D
E
Series ADSL Gateway
™
Step 3: Configure the ADSL
Gateway
In Step 3, you will configure the ADSL Gateway so it will be able to access the
Internet through your Internet Service Provider (ISP). You will need the setup
information provided by your ADSL ISP. If you do not have this information,
please contact them before proceeding.
The instructions from your ISP tell you how to set up your PC for Internet
access. Because you are now using the Gateway to share Internet access among
several computers, you will use the setup information to configure the Gateway
instead of your PC.
A. Open your web browser. (It
is all right if you get an error
message
Continue following these directions.) Enter http://192.168.1.1 in the web
browser's Address field. Press the Enter key.
B. An Enter Network Password window, shown in Figure B
(Windows XP users will see a Connect to 192.168.1.1 window, shown in
Figure B
enter admin in lowercase letters in the Password field (admin is the default
user name and password). Then click the OK button.
B
1
with Modem / Router / 4-Port Switch / Wireless-Ready
Note: You only need to configure the Gateway once using any com-
puter you have set up.
A
at this point.
). Enter admin in lowercase letters in the User Name field, and
2
B
, will appear
1
2
15