Maytag Crosley Guía De Uso Y Cuidado página 13

Troubleshooting
Help Codes
Help codes may be displayed to help you better understand what is occurring with the washer.
Code
Symbol
Service Diagnostic Mode
The washer detects that the door is open
when starting a cycle or the door is not
locking.
The washer failed to lock the door.
Oversudsing has occurred. If this code
disappears, the suds recovery cycle was
successful.
The washer experienced a power failure.
The washer experienced difficulty draining.
The washer has repeatedly tried to unlock
the door but has been unsuccessful.
Motor not running properly.
The washer has tried to fill, but has not
reached the proper level.
The washer door must be opened.
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
Meaning
For further assistance, call Customer Assistance toll-free at
1-800-688-9900 USA or 1-800-688-2002 Canada.
Solution
Push the Off button and restart the cycle.
Close the door tightly and restart the cycle.
Close the door tightly and restart the cycle.
Reduce the amount of detergent used for
that specific load.
Restart the cycle. If code is still displayed,
check to make sure power cord is securely
plugged in.
Check for a kinked drain hose.
Check for a plugged stand pipe.
Make sure door is tightly closed. Push the
Off button and then wait two minutes for the
door to unlock.
OR
Unplug the washer for two minutes and plug
back in.
Call for service. See below.
Make sure the water faucets are open all
the way.
Check for kinked hoses.
Check inlet screens on fill hoses.
This is a safety feature. The door must be
opened before another cycle is started.
12