Listening To Another Audio Device; Setting The Sound Characteristics - Insignia NS-B3113 Guia Del Usuario

Insignia NS-B3113 Boombox with iPod® Dock
3 Insert your iPod
your iPod
front of your boombox.

Listening to another audio device

To listen to another audio device:
1 Make sure the boombox is turned off
2 Plug one end of the auxiliary line-in cable (not included) into the
LINE IN jack on the back of your boombox.
3 Plug the other end of the cord into the Line-out jack on the audio
device.
4 Turn on your boombox.
5 Press FUNCTION one or more times until LINE appears on the
display.
6 Use the controls on the audio device to control playback.

Setting the sound characteristics

To change the sound characteristics:
1 Press SOUND to select the sound equalization you want. Choose
one of the following preset options: JAZZ, POP, CLASSIC,
ROCK, or FLAT (no equalization).
2 Briefly press BASS/TREBLE. The BASS icon and the current
bass setting are displayed.
3 Press TUNE to change the bass setting from -14 to +14 dB.
4 Briefly press BASS/TREBLE again. The TREBLE icon and the
current treble setting are displayed.
5 Press TUNE to change the treble setting from -14 to +14 dB.
The display
To view the display:
• Press DISPLAY during iPod
boombox shows real time for 5 seconds.
The display backlight will always be turned if the unit is operating
from its AC/DC Adaptor. If the boombox is operating on batteries,
backlight will be activated for 10 seconds after any button is
pressed.
into the iPod
®
® (with the display facing out) into the iPod
www.insignia-products.com
holder, then insert the holder and
®
/CD/TUNER/LINE IN mode. The
®
® dock on the
15